How Much Does a New Garage Door With Installation Cost? (2025 Price Guide)
How much does a new garage door with installation cost? For most US homeowners, a new garage door with professional installation runs between $1,200 and $4,000, with a typical mid-range single door landing around $1,500 to $2,500 and a double door closer to $2,000 to $3,500. Where you land in that range depends almost entirely on three things: the door material, the size of the opening, and how much customization you add.
A basic single steel door is cheap. A custom cedar wood carriage door is not. Understanding the spread before you call a dealer means you won’t overpay — and you won’t get talked into upgrades you don’t need. This guide breaks the cost down by material, size, and labor so you can quote the job with real numbers.
Average Cost of a New Garage Door Installed, by Size
Garage door pricing is almost always quoted by the size of the opening, because that’s what determines how much material and reinforcement the door needs. Here’s what installers typically charge for a full replacement, including removal of the old door, new tracks, springs, and labor.
| Factor | Single Door (8×7 to 9×8) | Double Door (16×7) |
|---|---|---|
| Budget steel | $700 – $1,500 | $1,200 – $2,200 |
| Mid-range steel (insulated) | $1,200 – $2,000 | $1,800 – $3,000 |
| Aluminum / glass | $1,500 – $3,500 | $2,500 – $5,000 |
| Wood / composite wood | $2,000 – $5,000 | $3,000 – $7,000 |
| Typical total installed | $1,500 – $2,500 | $2,500 – $4,000 |
A few honest caveats. The “national average” of around $1,900 to $2,600 that you’ll see quoted online masks enormous regional variation. Coastal metros and the Northeast run 15–30% above the Midwest and South, and any door over 9 feet wide or 8 feet tall stops being a “standard” door — prices jump quickly once an installer has to order a custom panel.
What Determines the Price
Door material
Material is the single biggest cost driver. Here’s how common options stack up:
- Steel (uninsulated): $700–$1,800 installed for a single. Cheap, durable, and fine for a detached garage you don’t heat. Dents easily and lets in cold — not ideal for an attached garage.
- Steel (insulated, polyurethane or polystyrene core): $1,500–$3,000 installed. The sweet spot for most homes. Better R-value, quieter operation, resists dents, and nearly mandatory for attached garages.
- Aluminum: $1,500–$3,500 installed. Lightweight and rustproof, often used with glass panels for a modern look. Less insulated and easier to dent.
- Fiberglass: $1,000–$3,000 installed. Won’t rust and resists salt air, so it’s popular in coastal homes, but it can yellow and crack over time.
- Wood: $2,000–$5,000 installed for a single, more for custom cedar or mahogany. Beautiful, but heavy, and it needs repainting or restaining every few years.
- Wood composite (overlay/faux wood): $1,800–$4,000 installed. Gives the wood look with far less maintenance.
Size and panel count
Most garage doors are panelized — a single door is typically four panels, a double door four to five. The wider and taller the opening, the more steel bracing and heavier springs you need. A 16×7 double door costs roughly 60–90% more than an 8×7 single, and an 18×8 or 20×8 for a shop or oversized garage quickly adds $1,000 or more over standard.
Labor and installation charges
Installation labor is usually built into the quoted price, but it’s worth knowing what it represents: typically $200 to $600 of the total, or about $6 to $10 per linear foot. The job includes:
- Removing and hauling away the old door and opener rails
- Installing new vertical and horizontal tracks
- Replacing the torsion springs (never try this yourself — they carry serious stored tension)
- Mounting hinges, rollers, and weatherstripping
- Balancing the door so it opens and closes evenly
- Testing safety sensors and the auto-reverse mechanism
If you opt for a professional install, always ask whether spring replacement is included, because some low quotes quietly exclude it — and garage door springs have a finite lifespan.
What About the Garage Door Opener?
Replacing the door is the moment to look at the opener, since the two share tracks and hardware. A smart opener from Chamberlain or LiftMaster runs $200 to $500 for the unit, and installation adds $100 to $300. If your opener is more than ten years old, or it’s a chain-drive unit that’s gotten noisy, swapping it during the door install costs less than doing it separately later. Some installers bundle it for as little as $150 when it’s part of a full replacement.
You don’t strictly need a new opener when the door is replaced, but expect an installer to at least point out an old or out-of-code unit.
Additional Costs That Catch People Off Guard
Beyond the door and labor, a handful of line items show up on real invoices. Budget for these up front:
- Old-door removal and disposal: $50–$150. Often “free” in a bundle, but some companies charge it as a line item.
- Replacing rusty tracks or broken springs: $100–$300 if they weren’t part of the original quote.
- Custom sizes, colors, or windows: $250–$1,500 depending on how far you stray from stock.
- Reinforcement for hurricane zones: $200–$600 for wind-rated doors and extra bracing in Florida and Gulf Coast areas.
- Permits: $50–$200 in municipalities that require one for a garage door swap.
When Replacement Beats Repair
A good rule of thumb: if the door itself is rotted, dented, or sagging and the repair bill would exceed half the cost of a new door, replace it. Non-structural issues — a worn spring, a bent track, stripped hinges, a bad sensor — are cheap, targeted repairs. If you’re chasing a specific problem rather than a full replacement, our guide to garage door repair cost walks through typical line items.
If the door still works but the opener is the problem, see what garage doors typically cost to understand whether you’re being quoted a fair price for a partial versus full job.
How to Get an Accurate Quote
Installed garage door pricing is not one-size-fits-all, and that’s why getting two or three written quotes matters. Before you call anyone:
- Measure the width and height of the opening exactly, and note whether it’s a single or double door.
- Write down whether the garage is attached or detached — insulated doors matter more when it shares a wall with the house.
- Decide on your must-haves (windows, insulation, wood look) before a salesperson pitches upgrades.
- Ask each installer to itemize the quote: door, labor, springs, disposal, and opener.
A written, itemized quote is the single best defense against vague upselling.
Frequently Asked Questions
How much does a new garage door with installation cost on average?
Most homeowners pay between $1,500 and $3,000 for a standard single or double door installed, with the full range running about $700 to $5,000 once you account for budget steel on the low end and custom wood on the high end. Your material choice and door size move the needle more than anything else.
Is it cheaper to install a garage door myself?
You can save $200 to $600 in labor with a DIY install, but doors with torsion springs are genuinely dangerous to install yourself — the springs are under enough tension to cause serious injury. A DIY route is only realistic for lightweight single doors and openers, and even then the warranty often requires professional installation to stay valid.
How long does a new garage door last?
A quality steel door with an insulated core typically lasts 15 to 30 years, while wood doors last 20 or more if they’re refinished regularly and cheap aluminum or uninsulated steel doors may show their age in 10 to 15 years. The springs usually need replacing every 7 to 10 years regardless of the door.
Does a new garage door increase home value?
Yes — garage door replacement consistently ranks as one of the highest-return exterior upgrades. Remodeling industry cost-versus-value reports routinely place it near the top, often recouping 90% or more of the project cost at resale, largely because the door dominates the front of most homes.
Should I replace the opener at the same time?
It’s the cheapest time to do it, since the installer already has the door disassembled. If your opener is more than 10 years old or you want smart-home and battery-backup features, bundle it. Otherwise, a working opener can simply be reattached to the new door.
For a deeper explore how these figures shift by region and material, HomeAdvisor’s garage door cost data and Angi’s garage door installation guide both publish regularly updated price ranges, and This Old House covers material trade-offs in plain terms.
The Bottom Line
How much does a new garage door with installation cost? Plan on $1,200 to $4,000 for most homes, with $1,500 to $2,500 covering the majority of single-door replacements and $2,500 to $3,500 the typical double door. Material is the lever you control: an insulated steel door is the value play for an attached garage, while wood and glass pay off mostly in curb appeal.
Get two or three itemized quotes, replace tired openers while the door is apart, and don’t let anyone talk you into upgrades you didn’t ask for. If you’re still deciding between patching what you have and starting fresh, our guide to whether the best price on a garage door replacement is worth chasing will help you lock in the right number.
